# Latest **URL:** https://forum.dadamachines.com/latest.md?page=2 [Latest](https://forum.dadamachines.com/latest.md) · [Categories](https://forum.dadamachines.com/categories.md) · [Tags](https://forum.dadamachines.com/tags.md) **Page:** 3 --- ## [Verilog "Hello world" example](https://forum.dadamachines.com/t/verilog-hello-world-example/452)
**Author:** [@grav](https://forum.dadamachines.com/u/grav)\ **Replies:** 1\ **Last updated:** [November 25, 2020, 6:00pm UTC](https://forum.dadamachines.com/t/verilog-hello-world-example/452 "2020-11-25T18:00:10Z")
I’ve been trying to do a bit of Verilog on the Doppler. As a starting point, I looked at the OpenTecLab video that implements a counter and some blinking LEDs from here: https://www.youtube.com/watch?v=-bIeiMmqaZE (it’s… --- ## [feed bigger solenoids/actuators](https://forum.dadamachines.com/t/feed-bigger-solenoids-actuators/474)
**Author:** [@giusto](https://forum.dadamachines.com/u/giusto)\ **Replies:** 2\ **Last updated:** [October 14, 2020, 9:54pm UTC](https://forum.dadamachines.com/t/feed-bigger-solenoids-actuators/474 "2020-10-14T21:54:25Z")
Hello is it possible to use the outputs to plug mosfets (or amplifiers of current) with separate supply of power to feed bigger actuators or electromagnets? In case the answer is yes : does the automat itself need alim… --- ## [Only one output is working?](https://forum.dadamachines.com/t/only-one-output-is-working/459)
**Author:** [@BarryLimestone](https://forum.dadamachines.com/u/BarryLimestone)\ **Replies:** 4\ **Last updated:** [September 9, 2020, 4:31pm UTC](https://forum.dadamachines.com/t/only-one-output-is-working/459 "2020-09-09T16:31:29Z")
Hi people, I just started using my kit and ran into an issue. I configured the automation according to the manual, by pressing the test button on the back, and thereafter sending a midi note to output 1. This works fin… --- ## [solenoid not responding](https://forum.dadamachines.com/t/solenoid-not-responding/454)
**Author:** [@mdawg](https://forum.dadamachines.com/u/mdawg)\ **Replies:** 3\ **Last updated:** [September 9, 2020, 4:09pm UTC](https://forum.dadamachines.com/t/solenoid-not-responding/454 "2020-09-09T16:09:05Z")
Hey there, I saw this on a thread last night, tried this again today, came into the forum and I’m not seeing the thread. I’m using Ableton Live - setup exactly how it’s setup in the startup section. I got the Automat to… --- ## [Mallet construction piece](https://forum.dadamachines.com/t/mallet-construction-piece/456)
**Author:** [@Tom](https://forum.dadamachines.com/u/Tom)\ **Replies:** 7\ **Last updated:** [August 31, 2020, 7:08pm UTC](https://forum.dadamachines.com/t/mallet-construction-piece/456 "2020-08-31T19:08:22Z")
Dear all, it would be cool if someone could give me some information: It’s about the mallet assembly https://dadamachines.com/getstarted/automat-toolkit-adapters-elements-assembly/mallet-assembly/?fbclid=IwAR0SdWGdX1P… --- ## [Mallet assembly help!](https://forum.dadamachines.com/t/mallet-assembly-help/218)
**Author:** [@benkamen](https://forum.dadamachines.com/u/benkamen)\ **Replies:** 1\ **Last updated:** [August 12, 2020, 7:22pm UTC](https://forum.dadamachines.com/t/mallet-assembly-help/218 "2020-08-12T19:22:20Z")
I’m a bit confused about how to put together the mallet attachment! I got up to the step where there’s a chisel… but then no info about what to do with the chisel. In the following pictures it looks like the shaft of t… --- ## [Did my slight impatience brick my doppler? (Windows 10)](https://forum.dadamachines.com/t/did-my-slight-impatience-brick-my-doppler-windows-10/445)
**Author:** [@zygurt](https://forum.dadamachines.com/u/zygurt)\ **Replies:** 2\ **Last updated:** [August 11, 2020, 9:34pm UTC](https://forum.dadamachines.com/t/did-my-slight-impatience-brick-my-doppler-windows-10/445 "2020-08-11T21:34:15Z")
Hi All, I setup my doppler v1.0 with a new computer tonight, and I feel I may have bricked it. Windows did the device setup, so I started uploading from the Arduino IDE. While this was happening, Windows popped up wit… --- ## [What Parts Does the DIYer need?](https://forum.dadamachines.com/t/what-parts-does-the-diyer-need/23)
**Author:** [@yewtreemagic](https://forum.dadamachines.com/u/yewtreemagic)\ **Replies:** 14\ **Last updated:** [August 11, 2020, 1:25pm UTC](https://forum.dadamachines.com/t/what-parts-does-the-diyer-need/23 "2020-08-11T13:25:27Z")
POWER SUPPLY CHOICES I’ve already spent some time on the Automat Facebook group gathering info and feedback, but it’s clear that there are quite a few basic points that those who have purchased the Dadamachine Automat a… --- ## [Automat not staying connected to laptop](https://forum.dadamachines.com/t/automat-not-staying-connected-to-laptop/434)
**Author:** [@Dan](https://forum.dadamachines.com/u/Dan)\ **Replies:** 1\ **Last updated:** [June 19, 2020, 8:42am UTC](https://forum.dadamachines.com/t/automat-not-staying-connected-to-laptop/434 "2020-06-19T08:42:36Z")
Hi, I have just tried updating the software for the Automat and ran into a problem. The Automat wasn’t showing as a device so I pressed the learn button twice. Now it keeps connecting and disconnecting itself constantl… --- ## [Name the part](https://forum.dadamachines.com/t/name-the-part/426)
**Author:** [@Petter](https://forum.dadamachines.com/u/Petter)\ **Replies:** 4\ **Last updated:** [May 24, 2020, 11:34am UTC](https://forum.dadamachines.com/t/name-the-part/426 "2020-05-24T11:34:17Z")
What are these called and are there any specifications to it that I need to be aware of if I wanna buy one? --- ## [Dada and RD-8 Beringher](https://forum.dadamachines.com/t/dada-and-rd-8-beringher/423)
**Author:** [@Antoni](https://forum.dadamachines.com/u/Antoni)\ **Replies:** 3\ **Last updated:** [May 18, 2020, 8:38am UTC](https://forum.dadamachines.com/t/dada-and-rd-8-beringher/423 "2020-05-18T08:38:49Z")
Hi there ! I tried to connect the Automat to the RD8 (Beringher drum machine) through the Automat Midi In. It receives the Midi and the leds flash according to the drum machine patterns , but the solenoids are not acti… --- ## [False triggering with Automat](https://forum.dadamachines.com/t/false-triggering-with-automat/419)
**Author:** [@battlesmk](https://forum.dadamachines.com/u/battlesmk)\ **Replies:** 4\ **Last updated:** [April 20, 2020, 4:25pm UTC](https://forum.dadamachines.com/t/false-triggering-with-automat/419 "2020-04-20T16:25:57Z")
Hi All, I am getting some false triggering on the Automat. I have the Automat being triggered by Ableton Live. Ableton Live is outputed from my computer via USB and then is connected to four Polyend Percs, daisy chained… --- ## [Help with Automat setup](https://forum.dadamachines.com/t/help-with-automat-setup/397)
**Author:** [@VincentP](https://forum.dadamachines.com/u/VincentP)\ **Replies:** 7\ **Last updated:** [April 19, 2020, 4:27pm UTC](https://forum.dadamachines.com/t/help-with-automat-setup/397 "2020-04-19T16:27:08Z")
I attempted to set up my new Automat using a midi keyboard that takes its power over the usb. That didn’t work, but that’s not a surprise, so I then connected a wind controller that has an internal battery. (Vindor ES1) … --- ## [Automat and OP-1](https://forum.dadamachines.com/t/automat-and-op-1/416)
**Author:** [@PhilippeBlanchard](https://forum.dadamachines.com/u/PhilippeBlanchard)\ **Replies:** 2\ **Last updated:** [April 9, 2020, 9:07am UTC](https://forum.dadamachines.com/t/automat-and-op-1/416 "2020-04-09T09:07:38Z")
Hi, has anyone used the USB MIDI out of the OP-1 directly into the Automat controller? --- ## [motors for strings](https://forum.dadamachines.com/t/motors-for-strings/414)
**Author:** [@alexspoon](https://forum.dadamachines.com/u/alexspoon)\ **Replies:** 0\ **Last updated:** [March 19, 2020, 3:30pm UTC](https://forum.dadamachines.com/t/motors-for-strings/414 "2020-03-19T15:30:58Z")
Hi there. Have just got my automat and am wanting to get some motors hooked up to it for playing strings. Does anyone have any experience with different types of motors and approaches? I understand it should be a 12V m… --- ## [Laser cut parts](https://forum.dadamachines.com/t/laser-cut-parts/402)
**Author:** [@Kailan](https://forum.dadamachines.com/u/Kailan)\ **Replies:** 2\ **Last updated:** [March 18, 2020, 12:56pm UTC](https://forum.dadamachines.com/t/laser-cut-parts/402 "2020-03-18T12:56:56Z")
Hello, I tried to make some new laser cut parts and I think, I need some help. When I tried to upload the svg file on “ponoko” there is only a blank space. I dont know, if this is the right file, Ive uploaded on github, … --- ## [Missing parts in Automat L kit](https://forum.dadamachines.com/t/missing-parts-in-automat-l-kit/411)
**Author:** [@davrav](https://forum.dadamachines.com/u/davrav)\ **Replies:** 1\ **Last updated:** [March 15, 2020, 9:23am UTC](https://forum.dadamachines.com/t/missing-parts-in-automat-l-kit/411 "2020-03-15T09:23:48Z")
Hi there, just checking to see if there should be metal bars included in Automat L Kit. I cannot build all the suggested solenoid attachments. Thanks --- ## [Dadachron connection fail](https://forum.dadamachines.com/t/dadachron-connection-fail/405)
**Author:** [@fertilejim](https://forum.dadamachines.com/u/fertilejim)\ **Replies:** 1\ **Last updated:** [March 10, 2020, 9:28am UTC](https://forum.dadamachines.com/t/dadachron-connection-fail/405 "2020-03-10T09:28:19Z")
Hi, I installed Dadachron on my iPad, but it won’t connect to automat. I successfully updated the automat firmware, but still plug’n’play doesn’t work. Any suggestions? Thanks! --- ## [Wirless MIDI Adapter](https://forum.dadamachines.com/t/wirless-midi-adapter/403)
**Author:** [@Joghurt](https://forum.dadamachines.com/u/Joghurt)\ **Replies:** 4\ **Last updated:** [March 10, 2020, 9:20am UTC](https://forum.dadamachines.com/t/wirless-midi-adapter/403 "2020-03-10T09:20:56Z")
I am considering buying a wireless MIDI adapter (Yamaha MD-BT01 Wireless Midi Adapter). Does anyone of you have any experience with this or with any other adapter to connect the Dadamachine wirelessly to the iPad? --- ## [composer pro \[canceled\]](https://forum.dadamachines.com/t/composer-pro-canceled/276)
**Author:** [@jasonw22](https://forum.dadamachines.com/u/jasonw22)\ **Replies:** 10\ **Last updated:** [February 15, 2020, 10:49am UTC](https://forum.dadamachines.com/t/composer-pro-canceled/276 "2020-02-15T10:49:50Z")
Very intriguing! Early discussion on lines and elsewhere and I’m already hearing wishes for more audio i/o, and I imagine the wishes for cv/gate will pipe up too (oh hey, there I did it). It’s a prototype right now? An… --- ## [Trouble getting started with Doppler dev on Ubuntu](https://forum.dadamachines.com/t/trouble-getting-started-with-doppler-dev-on-ubuntu/395)
**Author:** [@johnbentcope](https://forum.dadamachines.com/u/johnbentcope)\ **Replies:** 1\ **Last updated:** [February 5, 2020, 11:53pm UTC](https://forum.dadamachines.com/t/trouble-getting-started-with-doppler-dev-on-ubuntu/395 "2020-02-05T23:53:32Z")
Hello all! I’m just starting out with the Doppler and I’m having trouble loading into it via the Arduino IDE. I’m repeatedly getting a “Couldn’t find a Board on the selected port” error, while at the same time the Port o… --- ## [Dadachron](https://forum.dadamachines.com/t/dadachron/391)
**Author:** [@knoedel](https://forum.dadamachines.com/u/knoedel)\ **Replies:** 0\ **Last updated:** [February 1, 2020, 2:51pm UTC](https://forum.dadamachines.com/t/dadachron/391 "2020-02-01T14:51:57Z")
Hi. I just downloaded the dadachron app. Is there a way to reset all the velocity sliders together to the default level? Markus - Knoedel --- ## [amplify set](https://forum.dadamachines.com/t/amplify-set/381)
**Author:** [@robertofega](https://forum.dadamachines.com/u/robertofega)\ **Replies:** 2\ **Last updated:** [January 17, 2020, 3:56pm UTC](https://forum.dadamachines.com/t/amplify-set/381 "2020-01-17T15:56:48Z")
Hello, I would like to know how to amplify all the set of obiects and acoustic instruments, avoiding to put microphones to every objects/acoustic instruments. Roberto --- ## [Software for IPad](https://forum.dadamachines.com/t/software-for-ipad/283)
**Author:** [@b.michael](https://forum.dadamachines.com/u/b.michael)\ **Replies:** 6\ **Last updated:** [January 3, 2020, 10:54pm UTC](https://forum.dadamachines.com/t/software-for-ipad/283 "2020-01-03T22:54:34Z")
Does anyone know what software is used in the promotional video? Greetings! Beni --- ## [Pin headers / What do I connect the Doppler pins to?](https://forum.dadamachines.com/t/pin-headers-what-do-i-connect-the-doppler-pins-to/352)
**Author:** [@mcc](https://forum.dadamachines.com/u/mcc)\ **Replies:** 3\ **Last updated:** [December 28, 2019, 8:32pm UTC](https://forum.dadamachines.com/t/pin-headers-what-do-i-connect-the-doppler-pins-to/352 "2019-12-28T20:32:31Z")
Hi! I got a Doppler and I’m excited. But. I don’t know hardware or soldering very well. I know software pretty well but I’ve only soldered a board one time and I don’t own a soldering iron. Most of the hardware stuff I’v… --- ## [how to assemble mallet](https://forum.dadamachines.com/t/how-to-assemble-mallet/380)
**Author:** [@robertofega](https://forum.dadamachines.com/u/robertofega)\ **Replies:** 1\ **Last updated:** [December 28, 2019, 1:11am UTC](https://forum.dadamachines.com/t/how-to-assemble-mallet/380 "2019-12-28T01:11:39Z")
Hello, received your kit, I’m not understanding how to assemble the mallet on the solenoid, In attachement your picture. Roberto --- ## [Automat velocity to intensity to make accents louder?](https://forum.dadamachines.com/t/automat-velocity-to-intensity-to-make-accents-louder/374)
**Author:** [@bunq](https://forum.dadamachines.com/u/bunq)\ **Replies:** 2\ **Last updated:** [December 18, 2019, 11:57am UTC](https://forum.dadamachines.com/t/automat-velocity-to-intensity-to-make-accents-louder/374 "2019-12-18T11:57:54Z")
Hello, I just got the automat, and it works great. I tested velocity on firmware 2 and I understand it controls the gate time of Note On, but is it possible to control the intensity instead (the strenght of the strike … --- ## [Servomotors](https://forum.dadamachines.com/t/servomotors/372)
**Author:** [@Kailan](https://forum.dadamachines.com/u/Kailan)\ **Replies:** 3\ **Last updated:** [December 17, 2019, 10:26am UTC](https://forum.dadamachines.com/t/servomotors/372 "2019-12-17T10:26:18Z")
Hello everyone, can I also drive servo\`s with the automat ? Best Kai --- ## [Computer can't detect automat](https://forum.dadamachines.com/t/computer-cant-detect-automat/90)
**Author:** [@blungo2](https://forum.dadamachines.com/u/blungo2)\ **Replies:** 6\ **Last updated:** [December 12, 2019, 10:24am UTC](https://forum.dadamachines.com/t/computer-cant-detect-automat/90 "2019-12-12T10:24:50Z")
Hello, This keeps happening, sometimes my computer just cannot see the automat. The internal red light is on. But when I press the midi learn button there are no yellow LEDs. This has happened many times now. My automa… --- ## [Clock from USB input to MIDI Thru?](https://forum.dadamachines.com/t/clock-from-usb-input-to-midi-thru/364)
**Author:** [@Josephj](https://forum.dadamachines.com/u/Josephj)\ **Replies:** 4\ **Last updated:** [December 7, 2019, 4:52pm UTC](https://forum.dadamachines.com/t/clock-from-usb-input-to-midi-thru/364 "2019-12-07T16:52:16Z")
Would it be possible to have the clock signal from the USB input (coming from iOS sequencer) come out the MIDI Thru port, or is the MIDI Thru port inextricably tied to MIDI In? Thanks, Joseph [Previous page](https://forum.dadamachines.com/latest.md?page=1) [Next page](https://forum.dadamachines.com/latest.md?page=3)