# Automat stopped working

**URL:** <https://forum.dadamachines.com/t/automat-stopped-working/538>\
**Category:** Uncategorized\
**Created:** [July 16, 2021, 4:39pm UTC](https://forum.dadamachines.com/t/automat-stopped-working/538 "2021-07-16T16:39:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![kingkongsy](https://forum.dadamachines.com/letter_avatar_proxy/v4/letter/k/ac91a4/32.png) [@kingkongsy](https://forum.dadamachines.com/u/kingkongsy)\
**Post date:** [July 16, 2021, 4:39pm UTC](https://forum.dadamachines.com/t/automat-stopped-working/538/1 "2021-07-16T16:39:42Z")

</div>

Hi,

as of sudden, my Automat doesn´t work anymore.  
I didn´t change anything but the mapping due to changing my controller.  
Then my solenoids just stopped moving. If I connect a solenoid with a lower voltage, I does move a bit, but there suddenly seems to be a lack of power coming out of the outputs.

And then the inevitable happend. I tried to remap again to check, if my old controller still works and hit the Reset-Button-Of-Death…

So now in addition to not working anymore I can´t even update my Automat to check, if a fresh firmware would solve my problems.

Is there any chance to get it up and running again??  
This is kind of a catastrophe because I am only some days away from a gig I really need the device for and I doesn´t seem to be able to actually get a new device if the old one just died…
