# Mallet assembly help!

**URL:** <https://forum.dadamachines.com/t/mallet-assembly-help/218>\
**Category:** FAQ / Support\
**Created:** [January 5, 2019, 6:30pm UTC](https://forum.dadamachines.com/t/mallet-assembly-help/218 "2019-01-05T18:30:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![benkamen](https://forum.dadamachines.com/letter_avatar_proxy/v4/letter/b/898d66/32.png) [@benkamen](https://forum.dadamachines.com/u/benkamen)\
**Post date:** [January 5, 2019, 6:30pm UTC](https://forum.dadamachines.com/t/mallet-assembly-help/218/1 "2019-01-05T18:30:59Z")

</div>

I’m a bit confused about how to put together the mallet attachment!

I got up to the step where there’s a chisel… but then no info about what to do with the chisel. In the following pictures it looks like the shaft of the plastic part is missing entirely, so am I to remove the shaft? If I do that, it seems like the thing wouldn’t work at all!

Thanks for any guidance!

---

<div class="post-metadata">

**Author:** ![Tom](https://forum.dadamachines.com/letter_avatar_proxy/v4/letter/t/3d9bf3/32.png) [@Tom](https://forum.dadamachines.com/u/Tom)\
**Post date:** [August 12, 2020, 7:22pm UTC](https://forum.dadamachines.com/t/mallet-assembly-help/218/2 "2020-08-12T19:22:20Z")

</div>

I have the same question as I can’t assemble without the shaft of the plastic part.